Printing your own pictures, pictures, plans or text onto ceramics is simpler than you may accept. This article will exhibit two well known strategies that you can use at home to move pictures onto ceramic surfaces like plates, cup and tiles for example.
Technique 1 – Using waterslide papers to print plans onto ceramics
This is one of the simplest art ventures you will actually do and proficient looking outcomes can be normal on your first endeavor.
1 – Purchase some waterslide decal paper. In the event that your ceramic surface is white or a light shading, pick the unmistakable waterslide decal paper. Then again, if your ceramic surface is dull in shading, go for the white waterslide decal paper. Decal papers are accessible for both inkjet and laser printers and work in an unexpected way. I will clarify the distinctions later in this article. A pack of 5 A4 sheets is sufficient to print pictures onto around 20 ceramic cup or possibly 10 plates.
2-Open up your image or type your content into Microsoft word or your photograph altering programming like Photoshop. You should measure your work as indicated by your ceramic surface, so for a Cup printing venture, you would utilize the upper left quarter of your page and print out a test on a normal bit of paper and perhaps cut that out and place onto the Cup to guarantee that you are content with the size.
3 – Load your decal paper into your printer with the goal that your print lands onto the papers glossy side. This in hinh len ly su theo yeu cau is the covered side of the paper that is adequately an amazingly slender film that slides off the papers backing when water is applied later in the creation cycle.
4 – Take your printed picture or text and either cut it out now or on the off chance that you have filled your A4 sheet of decal paper with pictures, leave it as one piece as it will make the following stage simpler.
5 – If you have bought inkjet waterslide decal paper, you will likewise require some unmistakable stain for the following stage as you will currently begin to apply the stain to your picture. Guarantee that you have either held up at any rate 30 minutes or have utilized a hair dryer on your print to guarantee that it has dried.
